Gray metal-sided building with a brick wainscot and black gutters, similar to the shop and commercial buildings a contractor in Milford, NE works on

Milford, Seward County

Roofing, Masonry and Siding Contractor in Milford, NE

Elevated Masonry & Exteriors is a contractor in Milford, NE for roofs, brick, siding, gutters and paint on homes, shops and small commercial buildings. Milford is about 22 miles from our Lincoln office by I-80, and Trey Barnes is the direct contact for Milford and the rest of Seward County.

  • Licensed & insured
  • Free written estimates
  • Mon to Fri, 8 AM to 5 PM

Get Your Free Quote

We’ll get back to you in under 5 minutes
We cover

What do you need?

We’ll get back to you

No spam. No pushy sales. Just a straight answer.

Need it faster?Call (402) 627-8911 now.

Quick answer

Do you serve Milford, NE?

Yes. Milford is about 22 miles from our office at 701 P Street, roughly 30 minutes west on I-80 and the Milford spur. Milford is in Seward County, so you can call Trey Barnes directly at (402) 641-7709, or Brenton at (402) 417-3937. Every job starts with a site visit and a free written bid.

Milford at a glance

TownMilford, Nebraska
CountySeward County
ZIP codes68405
From our Lincoln officeAbout 22 miles, about 30 minutes via I-80 W and the Milford spur
Nearby communitiesPleasant Dale, Garland, Seward, Beaver Crossing, Cordova, Dorchester, Crete
Who to callTrey Barnes, (402) 641-7709
ServicesMasonry, Stone, Roofing, Siding, Gutters, Painting, EIFS & Stucco, Storm Repair, Commercial

Do You Work in Milford? Yes, Off I-80 West

Yes. Milford is an easy run for our crews: west on I-80 from Lincoln, then the spur north into town, about 22 miles total. Because Milford is in Seward County, Trey Barnes at (402) 641-7709 is your direct contact. Call, describe what you see on the roof, walls or gutters, and we set a time to look at it in person.

Milford is a city of 2,155 people (2020 census) in Seward County, ZIP 68405. It was platted in 1866 and took its name from a mill at a ford on the Blue River. The city's own history dates its first post office to 1864, when J. L. Davison served as postmaster. That long history means Milford mixes older homes near downtown with newer houses on the edges of town.

Southeast Community College and Milford's Building Mix

Milford is a college town in a quiet way. Southeast Community College's Milford campus opened on May 1, 1941 as the Nebraska State Trade School, which the college calls the original technical college in Nebraska. Today the campus offers nearly 40 career and technical programs, and SCC added the Prairie and Meadow residence halls there between 2018 and 2021. That brings student rentals and institutional buildings into a town of about 2,000 people.

For exterior work, that mix shows up as:

  • Rental houses and small apartment buildings that need exterior paint, siding repair and gutters between tenants.
  • Older brick and block buildings near downtown, where mortar joints, lintels and parapets wear out first.
  • Metal shop and farm buildings around town with brick or block wainscot, where the base takes the most water and impact.

Residence halls and student rentals mean more turnover, and landlords tend to need exterior work done between leases rather than in the middle of one.

Single story commercial building with gray brick and tan panel facade over storefront windows
Single story commercial building with gray brick and tan panel facade over storefront windows

Exterior Services as a Contractor in Milford, NE

As a contractor in Milford, NE, we cover roofing, siding, gutters, soffit and fascia, brick and block masonry, stone veneer, painting, stucco and storm repair. Milford homeowners mostly call about roofs and siding. Shop and business owners call about block and brick repair, metal-sided buildings with a masonry base, and exterior paint. Landlords call about all of the above between tenants.

Two story house with a red brick lower level, white lap siding and gutters
Two story house with a red brick lower level, white lap siding and gutters

Storms and Exterior Wear in the Milford Area

Seward County gets the same spring and summer storms as Lincoln. On June 3, 2014, the Storm Prediction Center logged 1-inch hail about 4 miles west of Beaver Crossing, southwest of Milford, and 1-inch hail in Seward. Hail that size commonly bruises shingles and cracks vinyl siding, and wind can lift shingles on exposed roofs. Check your roof edges, gutters and siding after any hard storm.

Our storm damage repair covers hail and wind damage to roofs, siding and gutters. We look at the damage in person and write up the repair in a bid you can take to your insurance company. On metal buildings with a brick or block base, we also check the masonry, since driven rain and hail hit the lower wall too.

Building Permits in Milford

Milford runs its own Building & Safety Department at 402 1st Street, phone (402) 761-3247. The city's building permit application notes that electrical, plumbing and mechanical work each need separate permits. Properties outside city limits fall under Seward County. We confirm permit requirements with the city or county for your address before work starts.

The city's permit applications are posted on the City of Milford forms page. On a re-roof or re-side, the questions that usually decide whether a permit is needed are whether decking, framing or the roofline changes. We sort that out with the city during the bid.

How a Milford Project Runs

A Milford job starts with a call to Trey or Brenton, or the quote form. We come out, look at the work and talk through options. You get a free written bid with no pressure. Once you approve it, we confirm the permit, schedule the crew, finish the work and clean up. Then we walk the job with you before we call it done.

  1. Call Trey Barnes at (402) 641-7709 or Brenton at (402) 417-3937. The quote form promises a reply in under 5 minutes.
  2. Site visit in Milford during business hours.
  3. Free written bid.
  4. Permit check with Milford Building & Safety or Seward County.
  5. Licensed and insured crew does the work.
  6. Clean-up and final walkthrough.

Towns Near Milford We Also Cover

Around Milford, we cover Pleasant Dale and Garland toward Lincoln, Seward to the north, Beaver Crossing and Cordova to the southwest, and Dorchester and Crete across the line in Saline County. If you are anywhere in Seward County, Trey is your contact. Crete and Seward each have their own page with local details.

  • Pleasant Dale 68423
  • Garland 68360
  • Seward 68434
  • Beaver Crossing 68313
  • Cordova 68330
  • Dorchester 68343
  • Crete 68333

Nearby pages: contractor in Seward and masonry and roofing in Crete.

In a rush? Let’s talk now.

Free written estimates for homeowners, builders, general contractors and property managers.

Frequently asked questions

Who should I call for a job in Milford?

Milford is in Seward County, so you can call Trey Barnes directly at (402) 641-7709. You can also call Brenton at (402) 417-3937 or send the quote form. We set up a time to see the work in person and give you a free written bid.

Do you repair brick or block wainscot on metal shop buildings?

Yes. Many shops and farm buildings around Milford have a masonry base under metal siding. That base takes the most water, splash and impact, so mortar joints and block faces wear first. We repair or rebuild the masonry, and will point out gutters that dump water against it.

Do you work on rental houses near the SCC Milford campus?

Yes. We work for homeowners, landlords and property managers. Common rental jobs are exterior paint, siding repair, gutters and roof repairs between tenants. Homes built before 1978 may need lead-safe painting practices, which we factor into the bid.

Does Milford need separate permits for electrical or plumbing?

Yes. The City of Milford's building permit application says electrical, plumbing and mechanical work each require separate permits. For exterior jobs like roofing, siding and masonry, we confirm with the Building & Safety Department on 1st Street before work starts.

Can you match old brick when I add on to a Milford house?

Often, yes. Matching starts with the brick size, color and texture, then the mortar color and joint style. Salvaged brick sometimes gives the closest match on older homes. We can bring samples to the site so you see how they look against the existing wall before you approve the bid.

How long is the drive from Lincoln to Milford?

About 22 miles, roughly 30 minutes from our office at 701 P Street, west on I-80 and north on the Milford spur. We schedule Milford visits Monday to Friday, 8 AM to 5 PM.